Mornsun LM75-23B24 AC/DC 75W Enclosed Switching Power Supply
HomeStore

Mornsun LM75-23B24 AC/DC 75W Enclosed Switching Power Supply

Mornsun LM75-23B24 AC/DC 75W Enclosed Switching Power Supply

$4.99

Original: $16.64

-70%
Mornsun LM75-23B24 AC/DC 75W Enclosed Switching Power Supply

$16.64

$4.99

The Story

Mornsun LM75-23B24 AC/DC 75W Enclosed Switching Power Supply

The LM75-23B24 is a 24V, 3.2A, 76.8W enclosed AC-DC switching power supply from Mornsun. It has a universal AC input voltage range of 85 to 305VAC and a DC input voltage range of 120 to 430VDC. The efficiency of the LM75-23B24 is up to 89%, and it has an isolation voltage of 4000VAC. The power supply is also equipped with a number of safety features, including overvoltage protection, undervoltage protection, overcurrent protection, and overload protection.

Features:

  • Universal AC input voltage range of 85 to 305VAC
  • DC input voltage range of 120 to 430VDC
  • Output voltage of 24V
  • Output current of 3.2A
  • Efficiency of up to 89%
  • Isolation voltage of 4000VAC
  • Overvoltage protection
  • Undervoltage protection
  • Overcurrent protection
  • Overload protection

check out : Mornsun LM75-22B48 AC/DC 75W Enclosed Switching Power Supply

Note:

  • Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load
  • The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m
  • All index testing methods in this datasheet are based on our company's corporate standards
  • In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability
  • The out case needs to be connected to the earth ( )of system when the terminal equipment in operating
  • The output voltage can be adjusted by the ADJ, clockwise to increase
  • Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units
  • The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Description

Mornsun LM75-23B24 AC/DC 75W Enclosed Switching Power Supply

The LM75-23B24 is a 24V, 3.2A, 76.8W enclosed AC-DC switching power supply from Mornsun. It has a universal AC input voltage range of 85 to 305VAC and a DC input voltage range of 120 to 430VDC. The efficiency of the LM75-23B24 is up to 89%, and it has an isolation voltage of 4000VAC. The power supply is also equipped with a number of safety features, including overvoltage protection, undervoltage protection, overcurrent protection, and overload protection.

Features:

  • Universal AC input voltage range of 85 to 305VAC
  • DC input voltage range of 120 to 430VDC
  • Output voltage of 24V
  • Output current of 3.2A
  • Efficiency of up to 89%
  • Isolation voltage of 4000VAC
  • Overvoltage protection
  • Undervoltage protection
  • Overcurrent protection
  • Overload protection

check out : Mornsun LM75-22B48 AC/DC 75W Enclosed Switching Power Supply

Note:

  • Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load
  • The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m
  • All index testing methods in this datasheet are based on our company's corporate standards
  • In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability
  • The out case needs to be connected to the earth ( )of system when the terminal equipment in operating
  • The output voltage can be adjusted by the ADJ, clockwise to increase
  • Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units
  • The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment